Explosion-proof air conditioner installation note

How to fix explosion-proof air conditioner? It should be pay attention to the following steps:

Indoor unit installation should pay attention to the following points:

1. Install horizontally on a stable, sturdy wall.

2. Keep the air inlet and outlet mouth unobstructed.

3. At least one meter away from the TV to avoid interference.

4. Keep away from heat and flammable parts.

5. Do not get close to high-frequency, high-power radios to avoid interference.

6. Air conditioners should not be installed in places where people are active to avoid danger.

7. There should be room at both ends and above place.

Outdoor unit installation should pay attention to the following points:

1. Install horizontally on a stable, sturdy wall or roof or balcony.

2. Keep the air inlet and outlet mouth unobstructed.

3. Avoid direct sunlight, if necessary, with a sun visor, but not hinder air circulation.

4. Exhausted hot air and emitted noise cannot affect neighboring households.

5. Do not place in areas with strong winds and dust.

6. Do not get near heat and flammable sources.

7. Can not affect pedestrian walking.

8. In order to keep the air flowing smoothly, there should be some space left and right in front and rear of the outdoor unit.

9. The outdoor unit of the cold and warm air conditioner should try not to have a place where the northwest wind blows.

Indoor and outdoor machine connecting pipe points:

1. The wall-mounted type should not exceed 5 meters.

2. The split cabinets of less than 4P should not exceed 10 meters.

3. About 5P split cabinets should not exceed 15 meters.

4. The difference between the outdoor unit and the indoor unit is less than 0.5 meters.

5. There can be no flat places.

6. The quality of the connecting pipe used should be good to prevent leakage.

And if you have any questions, feel free to contact us.

Email: info@magindustry.com

Tel:+86-519-89882680

https://www.magindustry.com/product/Explosion-proof-Air-Conditioners.html